User Tools

Site Tools

wiki:sns:intactgh:basic_operation

This is an old revision of the document!

Basic Operation

  1. Run Grasshopper by typing Grasshopper at the Rhino command line
  2. Navigate to the Intact.Simulation Toolbar in Grasshopper
  3. Select a Solver for the the physics of interest (stress, thermal, modal)
  4. Add components and assign material
  5. Apply boundary conditions (restraints and loads)
  6. Click Solve to compute simulation results
  7. View results by connecting the results viewer

Stress Simulation

  1. Insert stress solver block
  2. Specify resolution using number input
  3. Insert simulation component block
    1. Specify geometry
    2. Insert and connect material block
    3. Connect components to stress solver
  4. Insert restraint block
    1. Specify surfaces to restrain
    2. (Optional) select directions to restrain
    3. Connect restraints to stress solver
  5. Insert surface load block of choice (bearing load shown)
    1. Specify surfaces to load
    2. Specify load particulars
    3. Connect loads to stress solver
  6. Click [Solve] on stress solver component
  7. Insert visualization block
    1. Connect output of stress solver
    2. Select solution quantity of interest

wiki/sns/intactgh/basic_operation.1684183916.txt.gz ยท Last modified: 2023/05/15 14:51 by paul