wiki:sns:intactgh:static_orthotropic_laminateplate []

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Orthotropic Laminate Plate Stress Analysis ======

==== Geometry & Materials Setup ====

The geometry and grasshopper files for this example can be downloaded here: {{ :wiki:sns:intactgh:laminate_plate.zip |}} \\
*Legacy* files for Rhino 7 can also be found here: {{:wiki:sns:intactgh:laminate_plate_rhino7.zip}}


{{ :wiki:sns:intactgh:laminate_plate_setup.png |}}


**Materials:** 
  * Orthotropic
  * Young's Modulus (X): 25e6 psi
  * Young's Modulus (Y): 1e6 psi
  * Young's Modulus (Z): 1e6 psi
  * Poisson's Ratio (XY): 0.25
  * Poisson's Ratio (YZ): 0.0
  * Poisson's Ratio (XZ): 0.0
  * Shear Modulus (XY): 5e5 psi
  * Shear Modulus (XZ): 5e5 psi
  * Shear Modulus (YZ): 2e5 psi

==== Grasshopper File ====


{{ :wiki:sns:intactgh:laminate_plate_grasshopper.png |}}  

==== Reference Results ====

{{ :wiki:sns:intactgh:laminate_stress.png}}
{{ :wiki:sns:intactgh:laminate_plate_table.png |}}