wiki:sns:intactgh:static_multiload_cantilever []

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Static Scenario: Multi-Load Cantilever ======

==== Geometry & Materials Setup ====

The geometry and grasshopper files for this example can be downloaded here: {{ :wiki:sns:intactgh:multiload_cantilever.zip |}} \\
*Legacy* files for Rhino 7 can also be found here: {{:wiki:sns:intactgh:multiload_cantilever_rhino7.zip}}

{{ :wiki:sns:intactgh:multiload_cantilever_setup.png}}

**Materials:** 
  * Isotropic
  * Young's Modulus: 10 MPa
  * Poisson's Ratio: 0.3

==== Grasshopper File ====

Note, you have to manually input each load case individually into the solver. Each load is already present in the grasshopper file, so, if for example, you wanted to test extension in the x-direction you would connect the corresponding load to the solver block, re-solve, and change the visualization menu to x-direction displacement.

{{ :wiki:sns:intactgh:multiload_cantilever_grasshopper.png |}}  

==== Reference Results ====

{{ :wiki:sns:intactgh:multiload_cantilever_table.png |}}