wiki:sns:intactgh:slidingbc []

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

~~NOTOC~~
====== Sliding Boundary Condition ======
The Sliding Boundary Condition block in Intact.Simulation for Grasshopper can allow sliding on an arbitrary surface, by fixing the displacement normal to the surface to zero. It can be used, for example, to model pin joints which allow rotation around a cylindrical surface.


===== Usage =====
<WRAP group>
<WRAP half column>
A Sliding Boundary Condition block has one input:
  * the geometry of the surface along which to allow sliding (must be specified)

The output should be given to the Load input on a Stress Solver block.

<WRAP center round box 60%>
📌 See sliding boundary condition example: [[wiki:sns:intactgh:ex_8|Ex-8: Cylndrical Sliding Boundary Conditions]]
</WRAP>

</WRAP>
<WRAP half column>
{{ :wiki:sns:intactgh:sliding_bc.png?250 }}
</WRAP>
</WRAP>