User Tools

Site Tools

wiki:sns:sns2014:restraining_partial_faces_and_edges

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
wiki:sns:sns2014:restraining_partial_faces_and_edges [2017/07/13 14:05] – clairewiki:sns:sns2014:restraining_partial_faces_and_edges [2017/07/13 14:27] (current) – claire
Line 4: Line 4:
 In the Rhino viewport, the faces of a closed solid polysurface are outlined with bold edges. If the existing faces or edges of the solid do not reflect the desired restraints, the Rhino "Split" or "Split Face" functions can be used to modify or create faces, and to divide edges. In the Rhino viewport, the faces of a closed solid polysurface are outlined with bold edges. If the existing faces or edges of the solid do not reflect the desired restraints, the Rhino "Split" or "Split Face" functions can be used to modify or create faces, and to divide edges.
  
-==== Using the Split Face function =====+===== Using the Split Face function =====
  
 In the process pictured below, the top face of an existing solid is carved into two parts using the "Split Face" function. One edge will also be divided into three parts. In the process pictured below, the top face of an existing solid is carved into two parts using the "Split Face" function. One edge will also be divided into three parts.
wiki/sns/sns2014/restraining_partial_faces_and_edges.1499976336.txt.gz · Last modified: 2017/07/13 14:05 by claire