Differences

This shows you the differences between two versions of the page.

--- wiki:sns:intactgh:surface_loads [2023/10/25 13:26] – [Hydrostatic Load] goldy
+++ wiki:sns:intactgh:surface_loads [2025/08/13 10:00] (current) – goldy
@@ Line 4: / Line 4: @@
 ====== Surface Loads ======
 <WRAP half column>
-Surface loads are applied to faces of the components participating in the simulation by connecting to the Loads input on the stress solver component.
+Surface loads are applied to faces of the components participating in the simulation by connecting to the Loads input on the stress solver component. ⚠️Also, refer to [[wiki:sns:intactgh:lists|Using lists for Intact components]] for explanation of how list input works with Load Blocks.
 </WRAP>
 <WRAP half column>
 {{ :wiki:sns:intactgh:stress_block_loads.png?150 }}
 </WRAP>
 ===== Vector Force =====
 <WRAP group>
@@ Line 41: / Line 41: @@
 <WRAP group>
 <WRAP half column>
-A "Pressure" load is a surface load specified in terms of force per unit area. Positive pressures push into the surface, negative pressure pull.
+A "Pressure" load is a surface load specified in terms of force per unit area that is normal to the surface. Positive pressures push into the surface, negative pressure pull.
 A Pressure Load requires two inputs: