Differences

This shows you the differences between two versions of the page.

--- wiki:sns:intactgh:static_multiload_cantilever [2023/08/18 12:04] – created graham
+++ wiki:sns:intactgh:static_multiload_cantilever [2024/02/05 09:49] (current) – graham
@@ Line 3: / Line 3: @@
 ==== Geometry & Materials Setup ====
-The geometry and grasshopper files for this example can be downloaded here: {{ :wiki:sns:intactgh:multiload_cantilever.zip |}}
+The geometry and grasshopper files for this example can be downloaded here: {{ :wiki:sns:intactgh:multiload_cantilever.zip |}} \\
+*Legacy* files for Rhino 7 can also be found here: {{:wiki:sns:intactgh:multiload_cantilever_rhino7.zip}}
-{{ :wiki:sns:intactgh:multiload_cantilever_setup.png?900 |}}
+{{ :wiki:sns:intactgh:multiload_cantilever_setup.png}}
 **Materials:**
@@ Line 14: / Line 15: @@
 ==== Grasshopper File ====
-Note, that you have to manually input each load case individually into the solver. Each load is already present in the grasshopper file, so, if for example, you wanted to test extension in the x-direction you would connect the corresponding load to the solver block, re-solve, and change the visualization menu to x-direction displacement.
+Note, you have to manually input each load case individually into the solver. Each load is already present in the grasshopper file, so, if for example, you wanted to test extension in the x-direction you would connect the corresponding load to the solver block, re-solve, and change the visualization menu to x-direction displacement.
-{{ :wiki:sns:intactgh:multiload_cantilever_grasshopper.png?800 |}}
+{{ :wiki:sns:intactgh:multiload_cantilever_grasshopper.png |}}
 ==== Reference Results ====
-{{ :wiki:sns:intactgh:multiload_cantilever_table.png?800 |}}
+{{ :wiki:sns:intactgh:multiload_cantilever_table.png |}}