Differences

This shows you the differences between two versions of the page.

--- wiki:sns:intactgh:ex_7 [2024/02/02 12:19] – graham
+++ wiki:sns:intactgh:ex_7 [2024/02/06 10:51] (current) – graham
@@ Line 2: / Line 2: @@
 🧰The files for the geometry and setup can be downloaded here: {{ :wiki:sns:intactgh:sampling_points.zip }} \\
-*Legacy* files for Rhino 7 can also be found here: {{:wiki:sns:intactgh:sampling_points_rhino7.zip}}
+*Legacy* files for Rhino 7 can also be found here: {{ :wiki:sns:intactgh:sampling_points_rhino7.zip }}
 This example will show you how to sample points of an object using the solution sampler block.
@@ Line 10: / Line 10: @@
 {{ :wiki:sns:intactgh:ex7pic2.png?800 }}
-It is necessary to use a point or geometry object to reference this point from Grasshopper. This can be done by right clicking and setting the point.
+It is necessary to use a point or geometry object to reference this point from Grasshopper. This can be done by right-clicking and setting the point.
 {{ :wiki:sns:intactgh:ex7pic1.png?400 }}
-Now, the solution sampler object can be placed. Connect the solver output to the solution input on the solution sampler. The sampler will display the results from the last solved simulation.
+Now, the solution sampler object can be placed. Connect the solver output to the solution input on the solution sampler. The sampler will display the results from the last solved simulation. Note that the material input is left empty since all components in the assembly are of the same material (Aluminum 6061).
 {{ :wiki:sns:intactgh:ex7pic3.png }}