Differences

This shows you the differences between two versions of the page.

--- wiki:sns:intactgh:beginner_ex_4 [2024/01/23 10:22] – graham
+++ wiki:sns:intactgh:beginner_ex_4 [2024/01/31 12:13] (current) – [Hide CAD Model] graham
@@ Line 112: / Line 112: @@
 =====Hide CAD Model=====
   * To better visualize you can hide the geometry in Rhino or set the display to wireframe. This will prevent the object from interfering with the visualization of the simulation.
-The displacement distribution resulting from this static simulation example is displayed below. The maximum displacement is near 0.6 mm for fibers aligned along the x' (no second rotation). For the 45-degree CW rotation, it should be closer to 0.82 mm. To load the simulation results later, create a simulation reader block, right-click, select the simulation, and connect it to a visualize block.
+The displacement distribution resulting from this static simulation example is displayed below. The maximum displacement is near 0.07 mm for fibers aligned along the x' (no second rotation). For the 45-degree CW rotation, it should be closer to 0.53 mm. To load the simulation results later, create a simulation reader block, right-click, select the simulation, and connect it to a visualize block.
 {{:wiki:sns:intactgh:orthotropic_transformations_displacement.png}}