Differences

This shows you the differences between two versions of the page.

--- wiki:id:uploading_files [2017/07/12 12:01] – claire
+++ wiki:id:uploading_files [2023/02/20 15:59] (current) – michael
@@ Line 1: / Line 1: @@
+~~CLOSETOC~~
+{{TOC:wide}}
+\\
 ======Uploading Files======
 With Intact.design, you can upload parts from your favorite CAD program and analyze them in minutes! There are several ways you can achieve this--either through Onshape or directly through Intact.design
@@ Line 36: / Line 39: @@
   * VRML
 Before you can import a file from your local computer, you must convert the file to one of these file types. For instructions on saving stl files from various CAD programs check out this [[https://www.stratasysdirect.com/resources/how-to-prepare-stl-files/|tutorial article]].
-{{:wiki:id:id04.png?1000|}}\\
+{{ :wiki:id:uploading_files_1.png?1000 |}}\\
-To import a file, click on **[Import Model]**. This will prompt your local file manager. Select the file and click **[Open]**. The file should now be in your “Model Inventory.”
+To import a file, click on the **[New Project]** button in the top right corner. Once the New Project window appears, select the **[Choose File]** button. This will direct you to your local file manager. Select the desired file and click **[Open]**. Enter the appropriate units and your project title, then click **[Begin Import]**. The project will import to the Project Inventory page. {{ :wiki:id:uploading_files_2.png?400 |}}
-~~SP~~
-<WRAP half column>
+ Once the import has finished, you're ready to go!
+ Visit [[http://www.intact-solutions.com/learning/doku.php?id=wiki:id:navigation_controls|Navigation Controls]] and [[http://www.intact-solutions.com/learning/doku.php?id=wiki:id:simulation_setup|Simulation Setup]] to continue setting up your project.
+~~SP~~
 ===== Related Tutorial Videos =====
-To learn how to import a part from Onshape's public documents to Intact, watch this tutorial video from [[https://youtu.be/bvGBI1Y2rnM?t=17|0:17]] to 1:21.
+<WRAP group>
+<WRAP half column>
+To learn how to import a part from Onshape's public documents to Intact, watch the beginner's tutorial video starting at [[https://www.youtube.com/watch?v=IWOZrrKWSoc&t=15s|0:15]].
-{{youtube>large:bvGBI1Y2rnM}}
+{{youtube>IWOZrrKWSoc?large}}
 </WRAP>
+<WRAP half column>
+To learn how to import SOLIDWORKS assembly files from GrabCAD to Intact through Onshape, watch this tutorial video.
+{{youtube>5oqWQCOfcr4?large}}
+</WRAP>
+</WRAP>