Differences

This shows you the differences between two versions of the page.

--- wiki:id:simulation_setup [2017/07/12 12:35] – claire
+++ wiki:id:simulation_setup [2023/02/20 16:03] (current) – michael
@@ Line 1: / Line 1: @@
+~~CLOSETOC~~
+{{TOC:wide}}
+\\
 ====== Simulation Setup ======
-The Simulation Setup tab contains all the controls necessary to set up a simulation. Quick simulation options are directly available on this tab, while more advanced settings can be accessed from this tab.
+To start your simulation, select a project from the Project Inventory page. {{ :wiki:id:simulation_setup_1.png?1000 |}}
-<WRAP group>
+When the project loads, select the New Scenario button to start a new simulation. {{ :wiki:id:simulation_setup_2.png?direct&400 |}}
-<WRAP half column>
-==== Title ====
+This will direct you to the Scenario Setup page. The simple scenarios include Gravity, Squash, Squeeze, Push, Bend, and Twist. With these scenarios, Intact does most of the work for you. A full guide for each simple scenario can be found at the **[[http://www.intact-solutions.com/learning/doku.php?id=wiki:id:quick_scenarios|quick scenarios guide]]**.  For more complicated or specific loading conditions, select the Stress option for more control over the simulation setup, and follow the **[[http://www.intact-solutions.com/learning/doku.php?id=wiki:id:advanced_scenario|stress scenario guide]]**. For vibration and frequency simulation, choose the Vibration option and follow the **[[http://www.intact-solutions.com/learning/doku.php?id=wiki:id:vibration_scenario|vibration scenario guide]]**. {{ :wiki:id:simulation_setup_3.png?direct&400 |}}
-The title block allows the user to change the title of the simulation, allowing for organization and easy retrieval of a unique simulation.
-==== Material ====
-The material section allows the user to set the material of a part or assembly. For an assembly, the user can either choose to assign one material to all the parts using the pull down menu or select the “Set Multiple Materials” tab to assign different materials to various parts in the assembly. For more on materials, see [[wiki:id:Supported Materials]] and [[wiki:id:Assemblies]].
-==== Resolution ====
-The resolution slider allows the user to increase the number of integration elements. The default is 100000 elements. Checking “Show basis functions” displays a grid on the model. Notice that as you move the slider to the right, the grid is refined (smaller boxes). The grid becomes coarser (larger boxes) as you decrease the number of elements.
-</WRAP>
-<WRAP half column>
-{{ :wiki:id:controls6.png?250 |}}
-</WRAP>
-</WRAP>
-==== Up Direction ====
-Use the pull down menu to select the desired “up direction,” considering the orientation of the model. This is necessary for application of a scenario type. For example, the “up direction” specifies that gravity will act in the negative “up direction,” or down. Any of the axes options shown in Figure 3 can be selected. Use the coordinate system to assign the correct direction.{{ :wiki:id:controls2b.png?400 |}}
 ==== Unit System for Forces ====
@@ Line 39: / Line 28: @@
 ===== Related Tutorial Videos =====
+<WRAP group>
 <WRAP half column>
-Watch this beginner's tutorial video from [[https://youtu.be/bvGBI1Y2rnM?t=121|2:00]] to see an example of setting up a simulation.
+Watch this beginner's tutorial video from [[https://www.youtube.com/watch?v=IWOZrrKWSoc&t=202s|3:22]] to see how to set up quick scenarios.
-{{youtube>large:bvGBI1Y2rnM}}
+{{youtube>IWOZrrKWSoc?large&start=202}}
 </WRAP>
+<WRAP half column>
+Watch this advanced tutorial video from [[https://www.youtube.com/watch?v=qHOhXz5miTY&t=17s|0:17]] to learn how to set up advanced simulations.
+{{youtube>qHOhXz5miTY?large&start=17}}
+</WRAP>
+</WRAP>