wiki:sns:intactgh:sidebar []

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
**[[wiki:sns:snspro:scan_solve_pro|Scan&Solve Pro]]**

**[[wiki:sns:sns2014:scan_solve_2014|Scan&Solve 2014]]**

**[[wiki:sns:snsscript:Scan & Solve script|Scan&Solve Script]]**

**[[wiki:id:intact_automation|Intact.Simulation for Automation]]**

**[[[[wiki:sns:intactgh:intactgh|Intact.Simulation for Grasshopper]]**
  * **[[wiki:sns:intactgh:getting_started|Getting Started]]**
      * [[wiki:sns:intactgh:installation|Installation & Updates]]
      * [[wiki:sns:intactgh:activating_migrating_license|Activating & Migrating License]]
      * [[wiki:sns:intactgh:supported_rhino_models|Supported Rhino Models]]
      * [[wiki:sns:intactgh:basic_operation|Basic Operation]]
      * [[wiki:sns:intactgh:consistent_units|Units]]
      * [[wiki:sns:intactgh:tips_and_tricks|Tips and Tricks]]
      * [[wiki:sns:intactgh:support|Additional Support]]
  * **[[wiki:sns:intactgh:Advanced_Capabilities|Advanced Capabilities]]**
      * [[wiki:sns:intactgh:openvdb_support|Implicit OpenVDB Simulation]]
      * [[wiki:sns:intactgh:Automation|Automated Simulation]]
      * [[wiki:sns:intactgh:Lists|Lists Support]]
  * **[[wiki:sns:intactgh:components_and_assemblies|Components and Assemblies]]** ++| \\
[[wiki:sns:intactgh:components_and_assemblies#Components|Components]] \\
[[wiki:sns:intactgh:components_and_assemblies#Assemblies|Assemblies]] ++
  * **[[wiki:sns:intactgh:materials|Materials]]** ++| \\
[[:wiki:sns:intactgh:materials#Built-in Materials|Built-in Material]] \\
[[:wiki:sns:intactgh:materials#Custom Ductile Material|Custom Ductile Material]] \\
[[:wiki:sns:intactgh:materials#Custom Brittle Material|Custom Brittle Material]] \\
[[:wiki:sns:intactgh:materials#Failure Criterial|Failure Criteria]] \\
[[:wiki:sns:intactgh:materials#Built-in Orthotropic Materials|Built-in Composite Material]] \\
[[:wiki:sns:intactgh:materials#Custom Orthotropic Materials|Custom Composite Material]] \\
[[wiki:sns:intactgh:materials#Built-in Thermal Materials|Built-in Thermal Material]] \\
[[wiki:sns:intactgh:materials#Custom Thermal Materials|Custom Thermal Material]] ++
  * **[[wiki:sns:intactgh:restraints|Restraints]]**
  * **[[wiki:sns:intactgh:loads|Structural Loads]]** ++| \\
[[wiki:sns:intactgh:displacementbc|Displacement Boundary Condition]] \\
[[wiki:sns:intactgh:slidingbc|Sliding Boundary Condition]] \\
[[wiki:sns:intactgh:surface_loads|Surface Loads]] \\
[[wiki:sns:intactgh:body_loads|Body Loads]] ++
  * **[[wiki:sns:intactgh:thermalloads|Thermal Loads]]** ++| \\
[[wiki:sns:intactgh:thermal_bc|Thermal Boundary Conditions]] \\
[[wiki:sns:intactgh:thermal_body_flux|Thermal Body Flux]] ++
  * **[[wiki:sns:intactgh:solver_settings|Solver Settings]]**
  * **[[wiki:sns:intactgh:solvers|Solvers]]**
       * [[wiki:sns:intactgh:stress_solver|Stress Solver]]
       * [[wiki:sns:intactgh:modal_solver|Modal Solver]]
       * [[wiki:sns:intactgh:thermal_solver|Thermal Solver]]
  * **[[wiki:sns:intactgh:Results|Results and Visualization]]**
  * **[[wiki:sns:intactgh:Examples|Examples with Files]]** 
     * [[wiki:sns:intactgh:beginner_examples|Beginner Examples]]++| \\ 
[[wiki:sns:intactgh:getting_started|Ex-0: Getting Started Bracket]] \\ 
[[wiki:sns:intactgh:ex_1|Ex-1: Stress simulation of a bonded assembly]] \\
[[wiki:sns:intactgh:ex_2|Ex-2: Thermal simulation of a heat sink]] \\ 
[[wiki:sns:intactgh:ex_3|Ex-3: Modal simulation of a drone]] \\
[[wiki:sns:intactgh:beginner_ex_4|Ex-4: Planar orthotropic materials: transformation workflow]] \\
[[wiki:sns:intactgh:beginner_ex_5|Ex-5: Static simulation of an orthotropic motor mount]] ++ 
     * [[wiki:sns:intactgh:advanced_examples|Advanced Examples]]++| \\ 
[[wiki:sns:intactgh:ex_4|Ex-4: Displacement Boundary Conditions as restraints]] \\
[[wiki:sns:intactgh:ex_5|Ex-5: Using VDB implicits for lattice infill]] \\ 
[[wiki:sns:intactgh:ex_6|Ex-6: Linear Elements vs Quadratic Elements]] \\ 
[[wiki:sns:intactgh:ex_7|Ex-7: Sampling Custom Points]] \\
[[wiki:sns:intactgh:ex_8|Ex-8: Cylindrical Sliding Boundary Condition]] \\
[[wiki:sns:intactgh:ex_9|Ex-9: Hydrostatic Loading Boundary Condition]] ++
    * [[wiki:sns:intactgh:benchmarking_examples|Benchmarking Examples]]++| \\ 
[[wiki:sns:intactgh:static_multiload_cantilever|Static: Multi-load Cantilever]] \\
[[wiki:sns:intactgh:static_plate_w_hole|Static: Plate W/ Hole (Stress)]] \\
[[wiki:sns:intactgh:static_orthotropic_laminateplate|Static: Composite Laminate Plate (Orthotropic)]] \\
[[wiki:sns:intactgh:modal_clamped_squareplate|Modal: Clamped Square Plate]] \\  
[[wiki:sns:intactgh:modal_free_thin_squareplate|Modal: Free Thin Square Plate (Quadratic)]] ++
  * **[[wiki:sns:intactgh:troubleshooting|Troubleshooting Guide]]**
  * **[[wiki:sns:intactgh:FAQ|FAQs]]**

**[[wiki:id:intact_design|INTACT DESIGN]]**